The Sticker Series self-adhesive range of bitumen waterproofing membranes are manufactured by coextrusion of special compounds based on selected bitumen, modified with elasto-thermoplastic polymers with a non-woven composite polyester reinforcing mat located midway through the membranes thickness.
The Sticker range of waterproofing membranes, can be used in new build and refurbishment applications and are intended for various waterproofing applications including; Flat Roofs and Balconies or Terraces.
The lower face of the membrane is bonded with the use of special additives that give the bituminous compound specific and persistent adhesive properties. It is protected by a silicone-coated film which is removed at the time of installation. The upper face is finished with slate granules.
Reinforced Bituminous Membrane (RBM) which is commonly referred to as felt, still remains one of the most widely specified and installed forms of flat roof waterproofing for both new build and refurbishment projects across many market sectors within flat roofing.
There is a broad range of polymer modified felts to choose from to suit different applications.
RBM can accommodate extreme stresses from thermal movement and wind loading, whilst withstanding a higher degree of construction and maintenance traffic, making it an ideal choice for many projects.
Combining bitumen with additives such as Atactic Polypropylene (APP), Styrene Butadiene Styrene (SBS) or a combination of the two, alters the characteristics and performance of the membrane.
The addition of different carriers such as glass fibres, polyester or a blend of both produces a waterproof material on a roll that is easy to install, very strong, and low in cost.
Many developments and improvements have been made over the years, including development of both the bitumen compound, modification of polymers and the reinforcement materials used, originating with materials such as tar paper or asbestos, progressing to safer, higher-quality materials such as glass fibre or more recently polyester.
Polyester is probably one of the biggest improvements for RBM, making membranes extremely resilient, durable and long lasting. Improving the resistance to tearing and impact along with its resistance to withstand foot traffic.
The self-adhesive Sticker Series provides a safer flame-free alternative option for use on combustible surfaces. A range of air and vapour control layers, base layers and cap sheets are all available, ensuring good roofing practice and the latest NFRC Safe2Torch Guidelines can be followed.
Sticker self-adhesive products must be used with the appropriate MOY Self-Adhesive Primer. The side and end laps are thermally activated and sealed by use of a suitable hot air gun.
Self-adhesive membranes are only suitable for use in temperatures above +5°C.
Uppermost layer of reinforced bitumen membrane which is applied over the base layer as the final exposed waterproofing layer. This will be in the form of the Sticker ARD self-adhesive cap sheet, with a slate granule finish to provide UV protection.
First layer of reinforced bitumen membrane, installed in the built-up waterproofing system. Sticker Sanded 3mm self-adhesive will be utilised.
Thermal insulation is an essential component within a warm roof system. Its purpose is to control and maintain the temperature of the building below. It’s important to ensure a sufficient thickness of insulation is installed in order to meet the requirements of the appropriate Building Regulations and local legislation. Other considerations are critical when selecting the type of material used as a thermal insulant, such as its compressive strength and loading capacity, acoustic properties, fire performance and compatibility with the waterproofing system.
Purpose of the air and vapour control layer is to reduce or control the passage of air and moisture vapour passing from within the building, up through the roofing system, potentially causing risk of interstitial condensation within layers of the roof construction or allowing increased levels of air leakage. Sticker Sanded 3mm or Sticker Sanded AL (Foilcore) will be utilised as appropriate.
Where applicable an appropriate primer will usually be required prior to the application of a bituminous AVCL over the roof deck or any of the Sticker Series bituminous membranes.
The structural roof deck spans the structural frame of the building to provide a continuous support for the roofing system and ultimately what the roof is attached to. This may be in the form of a profiled steel, profiled aluminium, concrete or timber deck. All designed to accommodate all anticipated design loadings.
Colour
Charcoal Grey
Finish
Granular surface
Material
Co-extrusion of special compounds based on selected bitumen modified with elasto-thermoplastic polymers with a non-woven composite polyester reinforcing mat located midway through the membranes thickness
Shape
Rectangular
Length
1000 mm
Width
1000 mm
Warranty Description
Moy offer duration versatility in warranty dependant of the specification.
Extremely resilient, durable and long-lasting making Sticker Series resistant to tearing and impact and as a result capable of withstanding foot traffic. Excellent resistance to punctures and UV degradation.
Sticker Series provides a safer self-adhesive, flame-free alternative option for use on combustible surfaces, ensuring good roofing practice as per NFRC Safe2Torch Guidelines.
Sticker Series available with extended system warranties and service life.
CE marked, Environmental Product Declaration (EPD) inclusion.
Some of the Sticker Series may be suitable for use in conjunction with TS 1187 BROOF Regional Fire Certified systems (consult Moy for specific guidance).
Sticker Series membranes contain no asbestos, tar or other dangerous (red list) substances.
Options for Green Roofs, Blue Roofs and skid inhibiting surface finishes.
For a full list of technical downloads available from MOY see our Technical Downloads page
All Technical Downloads 
